NSK 6205ddu Bearing
The 6206-2RS and 6206-ZZ is a 30mm ball bearing that is found in many applications. The 6206-2RS ball bearing has two contact rubber seals one on each side of the ball bearing. The 6206-ZZ ball bearing has two non-contact metal shields one on each side of the ball bearing. If your application requires a 6206 ball bearing with only one seal or shield you can get this ball bearing and take one of the shields or seals off. This 30mm inch ball bearing is high quality and can take electric motor demands if needed.
This bearing coms in both a sealed and a shielded version. Please select between the two below. Select 2RS for a sealed bearing or ZZ for a shielded bearing.
This 6206-2RS bearing is a sealed ball bearing measuring 30x62x16. This single-row bearing is built to support radial loads and has a revolutions per minute (RPM) limit of 7,500 with greased lubrication. It is made from chrome steel for durability and resistance to deformity under heavy loads. This bearing has rubber seals on both sides to keep lubricant in and contaminants out and has been lubricated at the manufacturer so no additional lubrication is required.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
- 30 mm x 62 mm x 16 mm NACHI 7206BDB angular contact ball bearings
- 460.0000 mm
- 1.50 mm
- 30 mm x 62 mm x 16 mm NTN 7206UCG/GNP42 angular contact ball bearings
- 3000 rpm
- 240.0000 mm
- 30 mm x 62 mm x 16 mm NSK 6206ZZ deep groove ball bearings
- Double Row
- 7,650,000 N
- 30 mm x 62 mm x 16 mm ISO 6206 ZZ deep groove ball bearings
- Two Seals & Snap-Rin
- 95200 N
- 30,000 mm x 62,000 mm x 16,000 mm NTN 6206ZZNR deep groove ball bearings
- 140.0000 mm
- 52.00 mm
- 30 mm x 62 mm x 16 mm NTN NJ206E cylindrical roller bearings
- 15600 N
- 20.00 mm
- 30 mm x 62 mm x 30 mm SNR CUS206 deep groove ball bearings
- 150.000 mm
- 1600 rpm
- 30 mm x 62 mm x 16 mm ZEN 1206-2RS self aligning ball bearings
- 77.80 mm
- 2.50 mm
- 30 mm x 62 mm x 16 mm NTN 1206SK self aligning ball bearings
- 90 mm
- 0.200 kg